Sunday, November 11, 2018

Top 11.11 knife & folder deals on Aliexpress

!! On Sale !!
NOC Chef MT03 titanium frame-lock folders  
with  M390 blade and ball bearings:
You can buy the NOC Chef:

Puppy by Mosquito Tactical - exclusive M390 gentleman's folder
You can buy the Mosquito Tactical Puppy
 with M390 blade on Aliexpress: ***HERE***

!! NEW !! 
Mini version "Little Puppy": ***HERE*** or ***HERE***

Shirogorov style RFT D2, Bear Claw Flying Shark
and Green Thorn Jeans D2 side by side:
Shirogorov style RFT D2, Bear Claw Flying Shark  and Green Thorn Jeans D2
Shirogorov style RFT D2, Bear Claw Flying Shark  and Green Thorn Jeans D2
You can buy them on Aliexpress: 
RFT D2 version: ***HERE*** and ***HERE***
Bear Claw Flying Shark: ***HERE***
Green Thorn Jeans D2: ***HERE***
 Lovocoo Jeans D2: ***HERE*** or ***HERE***
High-end M390 version: 

Because of a stupid rule of Aliexpress the sellers are forced to photoshop
the locking mechanism and the "blood grooves" on the folders.

Dicoria made Shirogorov F111 liner-lock flippers  
with S35VN blade, carbon fiber handle, titanium pocket clip 
and ceramic ball bearings:
It's a huge folder, the real blade length is 111 mm (4.37")!
You can buy the Shirogorov F111 CF in 4 versions:
Dicoria Store: ***HERE*** or ***HERE*** or ***HERE***
FENGFUQIANG FENG's Store: ***HERE*** 

Kershaw 7200 Launch 2 auto clone
with D2 blade and aluminium handle.
Excellent fit & finish, very good ergonomics, 
snappy action and solid lock-up: 
Kershaw 7200 Launch 2 auto clone
You can buy the Launch 2 copy on Aliexpress:

Bear Claw Flying Shark titanium frame-lock kickstop flipper
with S35VN blade and ball bearings: ***HERE***

Y-Start LK5015D titanium frame-lock flipper  
with damascus blade  and ball bearings.
It comes with an extra VG10 blade!
You can buy the Y-Start LK5015D***HERE***

Two Sun TS80 titanium frame-lock folder  
with D2 blade, CF inlays and ball bearings:
You can buy the TwoSun TS80***HERE***

CH Knife CH3009 titanium frame-lock flippers  
with D2 blade and ball bearings:
You can buy the CH Knife flippers
***HERE*** or ***HERE***

CH Knife CH3008 titanium frame-lock flippers  
with D2 blade and ball bearings:
You can buy the CH Knife flippers

Hinderer XM18 style titanium frame-lock flippers  
with M390 (bowie or wharncliffe) blade and ceramic ball bearings:
You can buy the XM18 in 3 versions***HERE*** 

LOVOCOO Apologist light weight titanium frame-lock flipper
original design by Ivan Braginets (Ukrain)
 with S35VN blade and ceramic ball bearings***HERE***

Yon Xanadu YX-650 excellent titanium frame-lock flipper
 with D2 blade and ball-bearings: ***HERE***

SUECX IFS-20 by Nighthawk
high-end titanium frame-lock folder 
with M390 blade and unique screwless construction 

CH Knife CH3516 titanium - CF liner-lock flipper  
with S35VN blade and ball bearings: ***HERE***

CH Knife CH3519 titanium frame-lock flipper  
with S35VN blade, CF inlays and ball bearings
***HERE***

Y-Start LK5014 and LK5015 titanium frame-lock flippers
with VG10 blade and ball-berarings***HERE***

Y-START 2018 Russia FIFA World Cup memorial knife LK5018
 titanium frame-lock flipper
with VG10 blade and ball bearings***HERE***

Spyderco C158 Techno copy
with D2 blade and titanium frame-lock***HERE***


Prefect Lines light weight titanium frame-lock front flipper
with D2 blade and ball bearings***HERE***


TwoSun TS65 integral titanium frame-lock flipper  
with CF handle inlays, M390 blade and ball bearings:
 ***HERE***

Small version 
QM Qwaiken by Green Thorn titanum liner-lock flipper  
with D2 blade, ceramic ball bearings and carbon fiber handle
***HERE*** or ***HERE***
It weights only 70 g (2.47 oz) !

LOVOCOO S.S.E BKRSCKS titanium frame-lock flipper
 with D2 blade and ball bearings***HERE***

CH Knife CH3002 titanium frame-lock flipper
 with D2 blade and ball bearings***HERE***


Check out the other 11.11 deals 
at the following knife stores:
Kesiwo Outdoor Tools Factory Store: ***HERE***
Celebr knives Store***HERE***
LOVOCOO Store: ***HERE***
NIGHTHAWK Knives Store: ***HERE***
Dicoria Knives: ***HERE***
Ben's Knives Shop: ***HERE***
John Knives Factory Shop: ***HERE***
Eafengrow Top1 Store: ***HERE***
Y-Start Industrial Trading Store: ***HERE***
XS-Knife Store: ***HERE***

26 comments:

  1. Got the F111 and the Perfect Lines.
    Still no pocket clip on the Mini Puppy...

    ReplyDelete
    Replies
    1. Dead Silence, TS80, SRM 1161 and the FRN version of the mechanical karambit for me. :)

      I had a couple of emails with the owner/designer of MT and I addressed the lack of pocket clip issue of the big Puppy. So I hoped the small one would come with pocket clip.

      Delete
    2. I'm planning on getting the TS80 as well.
      I'm surprised you got it on AE though, they can be had for cheaper on Ebay, usually in between $50 and $55.

      Delete
    3. With 11.11 coupons it cost me $55.36 shipped. :) Bidding for new and popular TwoSun models on eBay is a PITA sometimes. If you're not lucky it takes weeks to grab one at a good price and the shipping times are also longer in my experience.

      Delete
    4. Shame I didn't see that I could get it for this price with coupons or I would have gotten it.
      But maybe it was for the best. Yesterday after writing my post, I decided to put a bid on Ebay for $55. This morning, I got a notice that I won it for $51 :D
      But I know what you mean about Ebay auctions, I tried $53 a few times in the last 3 weeks and have always been outbid until yesterday.

      Delete
    5. Wow, congratulations! :)
      I'm planning to pimp mine a bit by anodizing the handle. So I hope it'll arrive soon.

      Delete
    6. By the way you can also find unbranded TwoSuns on Ali if you prefer a clean blade.

      Delete
    7. I actually like the darker grey on this one so I think I'll leave mine alone. I'm having it shipped to a family member in the USA so I'll only get mine at Christmas.
      I don't mind the branding as long as it's not a clone with fake branding and that it's not billboarded all over the place.
      TwoSun is not too bad, but it would still look better if they would remove the words altogether and simply keep the sun logo in a corner.

      Delete
    8. They should put their sun logo on the pivot, you mean ;)

      Delete
    9. It's interesting that such a small detail as a pivot screw can have a big effect on the overall appearance of a folder.

      Delete
    10. Has your TS80 shipped yet?
      Mine that I won on Ebay a couple days ago still hasn't, nor had my F111 that I got from Feng on 11.11 :(

      Delete
    11. Yes, my TS80 was shipped quickly a couple of days ago.
      I'm pleased because all of my 11.11 stuffs got shipped in time (I didn't order anything from Feng).

      Delete
    12. My TS80 has arrived! :) The quality is amazing, holding it in the hand it feels like a much more expensive folder. Shipping was also super quick from the YSTART Store.

      Delete
    13. Nice to hear you like it!!!
      Although the Ebay seller I bought mine from took a few days to ship, shipping was actually quick. I checked my tracking this morning and it's already in the US, so my family member should have it in a couple of days. Me on the other hand, I will only handle it at Christmas unfortunately :( so for now, I'll be looking forward to your impressions and your pictures :)

      Delete
    14. It will be a nice Christmas surprise for sure! :)
      If the weather permits I'll take a couple of photos about it tomorrow.

      Delete
  2. I've just noticed that the NOC MT03 Chef is also on sale. I must resist! :)

    ReplyDelete
    Replies
    1. Just wait for the much cheaper D2 version. :)
      I'm glad there is more chef folding knifes because lets be realist, 99% of the time I only use knifes for eating or cutting card-boards.

      Delete
    2. A D2 version around $70 would be great! :)

      Delete
    3. The Spyderco Phillips Kapara is also designed for food preparation but it's not cheap either...

      Delete
  3. I promised myself not to buy Spyderclones anymore. Only a few were really worth it (Techno is one of them). But today I saw a EuroEdge clone. The seller send me a picture and it has the same fullers as the original. It's listed as C-125GP (sic). Interesting: http://m.dhgate.com/product/hot-sale-c-125gp-wild-boar-cpm-s30v-blade/431774078.html?

    ReplyDelete
    Replies
    1. They had to photoshop a couple of fullers on that EuroEdge! :))
      My favourite is the Slysz Bowie.

      Delete
  4. I just received 2 knives from the 910 series, I ordered the 4 main variations for a friend's brother who always loses his knives or gets them TSA'd.
    The numbering seems to be different now, the green G10 is labeled as 911, the black all steel is labeled 913 (instead of the usual 9104).
    Now I'm curious about the black G10 and the 9103.
    Maybe I should write to gearbest that I haven't received what I've ordered :P

    ReplyDelete
    Replies
    1. As I see in the Sanrenmu Store that's the new model numbering. The name of the black G10 version and the 9103 hasn't changed.

      Delete
    2. It's about time that gb lists the 810x
      For the actual price of a 910x I'd buy one

      Delete
    3. It would be a good challenge to make its opening smooth enough that it could be opened one handed.

      Delete
    4. Can't say, for $20 I won't buy one. Even though it would be a good knife for a CF front scale (and clip).

      Delete