Thursday, September 20, 2018

New knife & folder deals on Aliexpress (MT Ultratech Bounty Hunter OTFs, Dicoria F111, Hinderer XM18, HALO VI Warhound, CH3008, Tigend etc.) part 84

MT Ultratech Bounty Hunter OTF clones  
with VG10 blade and aluminium handle:
You can buy the Microtech UT Bounty Hunter OTFs on Aliexpress:
***HERE*** or ***HERE*** or ***HERE***

Because of a stupid rule of Aliexpress the sellers are forced to photoshop
the locking mechanism and the "blood grooves" on the folders.

MT HALO VI Warhound OTF copy  
with D2 blade and aluminium handle:
(The fuller is photoshopped in the picture.)
You can buy the HALO VI Warhound:
***HERE*** or ***HERE***

Jufule made year 2018 MT Scarab OTFs  
with D2 blade and aluminium handle:
(The fuller is photoshopped in the pictures.)
You can buy the MT Scarab OTFs in 8 versions:

MT Combat Troodon and skull patterned Ultratech OTFs  
with warhound, hellhound, tanto, spear point D2 blade and aluminium handle:
(The fuller is photoshopped in the pictures.)
In pair they make a nice set for lovers. 
One for her and one for him. :)) 
You can buy the MT Combat Troodon and Ultratech OTFs:
Dicoria made Shirogorov F111 liner-lock flippers  
with S35VN blade, carbon fiber handle, titanium pocket clip 
and ceramic ball bearings:
It's a huge folder, the real blade length is 111 mm (4.37")!
You can buy the Shirogorov F111 CF in 4 versions:
Dicoria Store: ***HERE*** or ***HERE*** or ***HERE***
Kesiwo Store: ***HERE*** or ***HERE***

Dicoria made tactical fixed blade knives with DC53 blade:
You can buy these Dicoria fixed blades:

Hinderer XM18 style titanium frame-lock flippers  
with M390 (bowie or wharncliffe) blade and ceramic ball bearings:
You can buy the XM18 in 3 versions***HERE*** 

!! Super Deal !!
Elegant KESIWO KS66 titanium frame-lock front flipper
with D2 blade, CF inlay and needle bearings:
You can buy the KS66 front flipper:

KESIWO Guardian tactical fixed blade knives
with D2 blade, G10 handle and kydex sheath:
You can buy the Guardian:

CH Knife CH3008 titanium frame-lock flippers
with D2 blade and ball bearings:
You can buy the CH3008 flippers:

Tigend 1814 liner-lock flippers
with 8Cr14MoV blade and ball bearings:
You can buy the Tigend 1814 flippers:

Tai Chi Yin Yang liner-lock flippers
with D2 blade and G10 handle:
You can buy the Yin Yang flippers: 
***HERE*** or ***HERE*** (EF version)

25 comments:

  1. You miss new haty D2 with carbon at Feng store!)

    ReplyDelete
    Replies
    1. Thanks! There are too many good stuffs out there. I'm going to write a 2nd post about them. :)

      Delete
  2. Tangram Knives now available on ali

    ReplyDelete
    Replies
    1. Could you post the link pls?

      Delete
    2. https://www.aliexpress.com/store/4504039

      Delete
    3. Thank you! I hoped for better prices although.

      Delete
    4. This is rock bottom. Maybe during next sale ?

      Delete
    5. I hope so. I'd like to grab the Vector.

      Delete
    6. That Vector would be nice if it's a button lock knife without a spring inside. No words on the locking mechanism though but in the item specifics it says Opener: Flipper but on the pictures thumb stubs (sic!)
      A button lock flipper without the ugly Tighe design and better steel than 8Cr13MoV would be nice indeed.

      Delete
    7. The Vector is a manual button-lock folder, it's not assisted. They can't mention locks on Ali because of the rules.

      Delete
  3. A high end Shiro/Sinkevich Cannabis clone (in M390 or S35vn and cf) would complete the list. I think I saw one a couple of years ago on Ali, but it was sold out. I still like my D2/micarta Cannabis. Ergo's are the best.

    ReplyDelete
    Replies
    1. Whats about the new titanium - S35VN version of the GTC - ZT0055? :)
      This fall will be hard on my wallet...

      Delete
  4. Very odd...so I like it. I just don't know what to think about the spring loaded tab...

    ReplyDelete
    Replies
    1. If it works similar to the Piston or the Flying Shark then I'll be happy.

      Delete
  5. By the way Isti, which front flipper do you like the most so far?

    ReplyDelete
    Replies
    1. I only have 3 of them. The Two Sun TS07 would be awesome with a better pocket clip so my vote goes for the G10 version of the "Zebra" (Zieba G2 wannabe). :)

      Delete
    2. The Mosquito Tactical Puppy. Although that's more of a two hand opening gentleman's folder than a front flipper.

      Delete
    3. Good looking knife with "hidden" oho, that's cool. No clip and the price tag are less cool.

      Delete
  6. Is that front flipper with the CF inserts available without those inserts?
    Imagine dremeled in dimples like on a traditional folder with stag handles. The "bolsters" polished, the "stag" anodized to bronze, would be a cool project I'd say.

    ReplyDelete
    Replies
    1. Yes, just PayPal me $80 an I'll send you one. ;))

      Something similar like THIS? Enrique Pena
      managed to combine the traditional lines with modern materials quite successfully.

      Delete
    2. Yes, that's the idea. No CF but a jigged bone pattern on that frontie.

      Delete
    3. I had the feeling like I've seen one of those without the CF, maybe just wishful thinking.

      Delete
  7. So the new Green Thorn Shiro F111 clones have shorter blades than the real thing? I was hoping it was an exact copy in terms of dimensions.

    ReplyDelete
    Replies
    1. No. The maximum blade length for knives on Ali is 100 mm so the sellers list the larger knives with smaller blade length.

      Delete